Products Performances:
High density polyethylene for non-toxic, tasteless, no smelly white particles, melting point is about 130 ° C, relative density of 0.941 ~ 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength. Dielectric properties, environmental stress cracking resistance sex also is good.
Appication:
HDPE pipe grade can be used in the production of pressure pipes. Such as pressurized pipes, fuel gas pipelines and other industrial pipes. It can also be used for making non-pressure pipes such as double–wall corrugated pipes, hollow–wall wingding pipes, silicon–pipes, silicon–core pipes, agriculture irrigation pipes and Aluminium–plastics coumpound pipes. In addition, through reactive extrusion (silane cross-linking), it can be used for producing crosslinked polyethylene pipes (PEX) for cold and hot water.
Packing Details:
25kg/bag or as client's reqirement.
High density polyethylene for non-toxic, tasteless, no smelly white particles, melting point is about 130 ° C, relative density of 0.941 ~ 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength. Dielectric properties, environmental stress cracking resistance sex also is good.
Appication:
HDPE pipe grade can be used in the production of pressure pipes. Such as pressurized pipes, fuel gas pipelines and other industrial pipes. It can also be used for making non-pressure pipes such as double–wall corrugated pipes, hollow–wall wingding pipes, silicon–pipes, silicon–core pipes, agriculture irrigation pipes and Aluminium–plastics coumpound pipes. In addition, through reactive extrusion (silane cross-linking), it can be used for producing crosslinked polyethylene pipes (PEX) for cold and hot water.
Packing Details:
25kg/bag or as client's reqirement.
| Molecular weight |
1.5million-4million |
| Density |
0.92-0.98 g/cm³ |
| Compression strength |
≥30 Mpa |
| Tensile strength |
≥20 Mpa |
| Elongation at break |
≥280 % |
| Dynamic Friction coefficient |
≤0.20 |
| Notched impact strength (Charpy) |
≥100 kJ/m2 |
| Abrasion wear index |
≤30 mg |
| Vicat softing point |
≥80°C |
| Hardness shore-D |
60-65 D |